2SC5053
Transistors
Medium power transistor (50V, 1A)
2SC5053
zFeatures
1) Low saturation voltage, typically VCE(sat) = 0.12V at IC / IB = 500mA / 50mA
2) PC=2W (on 40×40×0.7mm ceramic board) 3) Complements the 2SA1900
z Absolute maximum ratings (Ta=25°C)
ParameterCollector-base voltageCollector-emitter voltageEmitter- base voltageCollector currentCollector power dissipationCollector power dissipationStorage temperature++zDimensions (Unit : mm) MPT3(1)Base(2)Collector(3)Emitter SymbolVCBOVCEOVEBOICPCtjtstgLimits60505120.52150−55 to +150UnitVVVAA (Pulse)WW°C°C∗2∗1∗1 Single pulse Pw=100ms∗2 When mounted on a 40 40 0.7mm seramic board.
zElectrical characteristics (Ta=25°C)
ParameterCollector-base breakdown voltageCollector-emitter breakdown voltageEmitter-base breakdown voltageCollector cutoff currentEmitter cutoff currentCollector-emitter saturation voltageDC current transfer ratioTransition frequencyOutput capacitanceSymbolBVCBOBVCEOBVEBOICBOIEBOVCE(sat)hFEfTCobMin.60505−−−120−−Typ.−−−−−−−15015Max.−−−0.10.10.4390−−
UnitVVVµAµAV−MHzpFIC=50µAIC=1mAIE=50µAVCB=40VConditionsVEB=4VIC/IB=500mA/50mAVCE/IC=3V/0.5AVCE=5V , IE=−50mA , f=100MHzVCB=10V , IE=0A , f=1MHz
zPackaging specifications and hFE
TypePackagehFEMarkingCodeBasic ordering unit (pleces)∗ Denotes hFE2SC5053MPT3QRCG∗T1001000
Rev.D 1/2
元器件交易网www.cecb2b.com
2SC5053
Transistors
zElectric characteristics curves
COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV)1000COLLECTOR CURRENT : IC (mA)9008007006005004003002001000010mA9mA1000A8m7mATa=25°CVCE=3V10005002001005020105211m6mA500Ta=25°CIC/IB=10
DC CURRENT GAIN : hFE5mA200100502010524mA3mA2mAIB=1mA1234510.0010.0050.020.050.10.20.0020.010.51210m100m12COLLECTOR TO EMITTER VOLTAGE : VCE (V)COLLECTOR CURRENT : IC (A)COLLECTOR CURRENT : IC (A)Fig.1 Grounded emitter output characteristicsFig.2 DC current gain vs. collector currentFig.3 Collector-emitter saturation voltage vs.collector current
TRANSITION FREQUENCY : fT (MHz)1005020105COLLECTOR CURRENT : IC (A)500200100502010521−1mTa=25°CVCE=5VCOLLECTOR OUTPUT CAPACITANCE : Cob( (pF)1000200Ta=25°Cf=1MHzIE=0A5210.50.20.1∗IC Max. (Pulse )
100ms10msDC0.050.02Ta=25°C∗Single0.01 nonrepeatitive pulse210.1−10m−0.1−10.20.512510200.20.5125102050100EMITTER CURRENT : IE (A)COLLECTOR TO BASE VOLTAGE : VCB (V)COLLECTOR TO EMITTER VOLTAGE : ICE (V)Fig.4 Gain bandwith product vs. emitter currentFig.5 Collector output capacitance vs. collector-base voltageFig.6 Safe operating area Rev.D 2/2
元器件交易网www.cecb2b.com
Appendix
NotesNo technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD.The contents described herein are subject to change without notice. The specifications for theproduct described in this document are for reference only. Upon actual use, therefore, please requestthat specifications to be separately delivered.Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuitsand deciding upon circuit constants in the set.Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of anythird party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices.Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer.Products listed in this document are no antiradiation design.The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys).Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance.It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog.Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2008 ROHM CO.,LTD.THE AMERICAS / EUROPE / ASIA / JAPAN
Contact us : webmaster@rohm.co.jp
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, JapanTEL : +81-75-311-2121FAX : +81-75-315-0172Appendix1-Rev2.0
因篇幅问题不能全部显示，请点此查看更多更全内容