Optoway SPS-7110WG
SPS-7110WG / SPS-7110AWG (RoHS Compliant)
3.3V / 1310 nm / 1.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER FEATURES
l Hot-Pluggable SFP Footprint LC Optical Transceiver l Small Form-Factor Pluggable (SFP) MSA compatible l Compliant with IEEE 802.3z 1000BASE-LX
l Compliant with Fibre Channel 1x SM-LC-L FC-PI l SFF-8472 Digital Diagnostic Function l AC/AC Coupling according to MSA l Distance up to 10 km
l Single +3.3 V Power Supply l RoHS Compliant
l -10 to 85oC Operation: SPS-7110WG l -40 to 85oC Operation: SPS-7110AWG
l Class 1 Laser International Safety Standard IEC-60825 Compliant
1
***********************************************************************************************************************************************************************
**********************************************************************************************************************************************************************
DESCRIPTION
APPLICATIONS
l Gigabit Ethernet Switches and Routers l Fibre Channel Switch Infrastructure l XDSL Applications l Metro Edge Switching
The SPS-7110WG series single mode transceivers is small form factor pluggable module for bi-directional serial optical data communications such as Gigabit Ethernet 1000BASE-LX and Fibre Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
Package LC SFP with DMI LC SFP with DMI
Temp. (oC)
TX Power RX Sens. RoHS (dBm) (dBm) Compliant
-21 -21
Yes Yes
ORDER INFORMATION
P/No. SPS-7110WG SPS-7110AWG
Bit Rate
(Gb/s) 1.25 1.25
1000 BASE LX / LH LX / LH
Distance (km) 10 10
Wavelength
(nm)
1310 1310
-10 to 85 -3 to -9.5 -40 to 85 -3 to -9.5
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature Power Supply Voltage
Symbol Tstg Topr Vcc
Min -40 -10 -40 -0.5
Max 85 85 85 3.6
Units oC oC V
Notes
SPS-7110WG SPS-7110AWG
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Case Temperature Power Supply Current Data Rate
Symbol Vcc Topr ICC (TX+RX)
Min 3.1 -10 -40 100
Typ 3.3 200 1250
Max 3.5 85 85 300
Units / Notes
V
oC / SPS-7110WG o
C / SPS-7110AWG
mA Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0
元器件交易网www.cecb2b.com
Optoway
Parameter
Symbol
SPS-7110WG
Min
Typ
Max
Units dBm nm nm dB ps ps dB/Hz µA µA V V V µs ms V V
Notes 1
RMS (σ)
20 % to 80% Values 20 % to 80% Values
Peak-to-Peak
2 2 3 3
2
***********************************************************************************************************************************************************************
Transmitter Specifications (-10oC < Topr < 85oC, 3.1V < Vcc < 3.5V)
Optical
Optical Transmit Power Po -9.5 --- -3 Output Center Wavelength 1270 1310 1350 λ Output Spectrum Width --- --- 2.5 ∆λ Extinction Ratio ER 9 --- --- Optical Rise Time tr 260 Optical Fall Time tf 260 Relative Intensity Noise RIN -120 Electrical
Data Input Current – Low IIL -350 Data Input Current – High IIH 350 Differential Input Voltage VIH - VIL 0.5 2.4 TX Disable Input Voltage – Low TDIS, L 0 0.5 TX Disable Input Voltage – High TDIS, H 2.0 Vcc TX Disable Assert Time TASSERT 10 TX Disable Deassert Time TDEASSERT 1 TX Fault Output Voltage -- Low TFaultL 0 0.5 TX Fault Output Voltage -- High TFaultH 2.0 Vcc+0.3 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Receiver Specifications (-10oC < Topr < 85oC, 3.1V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Units dBm dBm dBm dBm dB nm V V V
Notes
4 4
Transition: low to high Transition: high to low
5 5
Optical Sensitivity Sens -21 Maximum Input Power Pin -3 Signal Detect -- Asserted Pa --- -21 Signal Detect -- Deasserted Pd -31 --- --- Signal detect -- Hysteresis 1.0 --- Wavelength of Operation 1100 --- 1600 Electrical
Differential Output Voltage VOH – VOL 0.6 2.0 Output LOS Voltage -- Low VOL 0 0.5 Output LOS Voltage – High VOH 2.0 Vcc+0.3 4. Measured at 27-1 PRBS at BER 1E-12 @ 1300 nm.
5. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0
元器件交易网www.cecb2b.com
Optoway
SPS-7110WG
3
*********************************************************************************************************************************************************************** CONNECTION DIAGRAM
PIN
1 2 3 4 5 6 7 8 9 10
Signal Name
TX GND TX Fault TX Disable MOD-DFE2 MOD-DEF1 MOD-DEF0 N/C LOS RX GND RX GND
Description
Transmitter Ground
Transmitter Fault Indication
Transmitter Disable (Module disables on high or open)
Modulation Definition 2 – Two wires serial ID Interface
Modulation Definition 1 – Two wires serial ID Interface
Modulation Definition 0 – Ground in Module
Not Connected Loss of Signal Receiver Ground Receiver Ground
PIN
11 12 13 14 15 16 17 18 19 20
Signal Name Description
RX GND Receiver Ground
RX DATA OUT- Inverse Receiver Data Out RX DATA OUT+ Receiver Data Out RX GND Vcc RX Vcc TX TX GND
TX DATA IN+ TX DATA IN- TX GND
Receiver Ground
Receiver Power – 3.3V±5% Transmitter Power – 3.3V±5% Transmitter Ground Transmitter Data In
Inverse Transmitter Data In Transmitter Ground
Module Definition
Module Definition
4
MOD-DEF2 PIN 4 SDA
MOD-DEF1 PIN 5 SCL
MOD-DEF0 PIN 6 LV-TTL Low
Interpretation by Host Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0
元器件交易网www.cecb2b.com
Optoway SPS-7110WG Tx_DISABLETx_FAULT4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC VeeTTx_DISABLETx_FAULT(1,17,20)324.7K to 10KΩTD +LDDriver18Z=50ΩTD +100ΩTD -19TD -Z=50Ω1μH10nF10μF10nF1μH10μFVccT16Vcc 3.3VVccR1510nF10μFSerDesICProtocol ICRD -12Z=50Ω100ΩRD -POSTAmpRD +13Z=50Ω4.7K to 10KΩRD +depending on SERDESLOSS OF SINGALLOSVeeRMOD_DEF(0)8(9,10,11,14)6544.7K to 10KΩVcc 3.3V4.7K to 10KΩMODULE DETECTSCLSDA4.7K to 10KΩEEPROMMOD_DEF(1)MOD_DEF(2)SFP module PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0
因篇幅问题不能全部显示，请点此查看更多更全内容